EasyManua.ls Logo

ISCO 6700SR - SR Sampler Features

ISCO 6700SR
190 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6700SR Refrigerated Sampler
3
Table 1 6700SR Sampler Features
G
ENERAL
F
EATURES
Top Cove r
Protects controller.
Lockable latches.
Controller
Contains a rechargeable desiccant to prevent moisture damage to the
electronics, pump, and distributor systems.
Control panel sloped 15 degrees for easy reading.
Keys labeled with large, vivid icons.
80-character display (4 lines by 20 columns).
Display has selectable backlight:
Always on or always off.
Timed, switching off when keypad is inactive for 60 seconds.
Memory for program and data storage.
Flash memory for easy software upgrades.
Refrigerator
The 6700SR requires 120 volts AC, 60 Hz, or optional 230 volts AC, 50 Hz. A
built-in 12 volt DC power converter powers the controller.
Adjustable
Distributor Arm
A single distributor arm adjusts quickly to fit all bottle kits. Easily removed
for composite sampling.
Discharge Tube and Support
Spring
Routes sample liquid from pump tube, through distributor arm to sample bottle.
Compatible
Isco Products
581 Rapid Transfer Device Refrigerator Temperature Sensor
674 Rain Gauge 3200 Series Flow Meters
700 Series Modules 4100 Series Flow Loggers
YSI 600 Sonde 4200 Series Flow Meters
YSI 6820 Sonde Flowlink 3 and 4, Samplink
YSI 600XL Sonde 1640 Liquid Level Actuator
PAL 1101 3770 Field Printer
Real-Time Displays
As the sampler runs a sampling program, it displays the program’s status. The
status display may include such information as the time of the next sample, the
number of the next bottle, or whether the sampler is disabled or stopped. If the
sampler encounters an error while running the program, it displays a message
alerting you to the problem.
Programming for Modules
Program the modules from the sampler’s control panel. The module’s program
settings become part of the sampling program.
Programming for YSI Sondes
Calibrate and program the YSI 600 sonde from the sampler’s control panel. The
YSI program settings become part of the sampling program. The 6700SR can also
support the YSI 6820 and 600XL sondes. See Chapter 6.

Table of Contents