Iseki SGR19 - CHAPTER 3. ENGINE; SPECIFICATIONS

20
SERVICE MANUAL FOR SGR19 & SGR17
CHAPTER 3. ENGINE
I. SPECIFICATIONS
hese specifications are subject to change without notice.
E393-G E383-G
Type ............................................................................................................... 4-cycle, water-cooled, Diesel
with swirl type combustion chambers
Cylinder – bore × stroke ....................................................mm ..........3 – 74×72 .................................3 – 70×72
Total displacement ............................................................... cc ...............928............................................831
Engine performnce ......... Rated output............... ps(kW)/rpm ..... 19.0(14.0)/2900........................ 16.5(12.1)/2900
Maximum torque ..kg·m(N·m)/rpm ...... 5.4(53.0)/2300.......................... 4.7(46.1)/2300
Fuel consumption ... g/sp-h/2900rpm ............................................. 215
Unloaded maximum speed ........... rpm ............................................ 3150
Unloaded minimum speed ............ rpm ............................................ 1250
Fuel .............................................................................................................................. Diesel fuel
Dry weight ........................................................................... kg .........................................85
Dimensions (L × W × H) ...................................................mm .............................. 520 × 400 × 554
Fuel injection order ....................................................................................................... 1 – 3 – 2
Direction of rotation ....................................................................................... Clockwise viewed from fan
Fuel injection system
Fuel injection pump ...... model ....................................................................... DN-PD+KCA-P
Plunger (dia. × stroke) ..... mm ................................ 5.0 × 6.0
Injection nozzle ...................................................................................... Throttle type
Governor ................................................................................... Centrifugal, all-speed governor
Valve timing...................... Intake .........Opening ...........................................10° BTDC
Closing............................................. 45° ATDC
Exhaust ......Opening ...........................................46° BBDC
Closing............................................. 10° ATDC
Valve clearance (Intake/Exhaust) ............................ mm ................................... 0.25
Fuel injection timing ........................................................................................23° BTDC
Compression pressure (at 300 rpm) ................... kg/cm
2
..................................... 30
Oil pan capacity ....................................................... litre .........................Max. 2.5/ Min. 1.5