57
CHAPTER 4. TRANSMISSION & RELATED PARTS
5.3. REASSEMBLY
Reassemble in reverse order of disassembly, tak-
ing the following precautions mentioned below:
(1) Install the brake discs and seperator plates
• Before reinstalling new brake discs, immerse
them in oil for a few minutes.
Fig. 4-17
(2) Install the actuator ball.
Fig. 4-18
(3) Install the cover and linkage.
5.4. ADJUSTMENT OF BRAKE PEDAL AFTER REASSEMBLING
Fig. 4-19
Inject grease.
Parking brake cable should run under the HST unit.
Align the markings on the pin and arm to each other.
To Next Page
