PAMSPAN501x G.SHDSL.bis EFM Gateway
-90
3. Regenerated Priority to Traffic Class map, as shown in the following figure,
specifies the mapping of Regenerated Priority to their Traffic Class values.
The following table gives the range of values for each option that can be specified
with this command and a default value.
Option Description Default value
Priority 0 The traffic class to which the Regenerated
Priority with a value of 0 is mapped.
0
Priority 1 The traffic class to which the Regenerated
Priority with a value of 1 is mapped.
1
Priority 2 The traffic class to which the Regenerated
Priority with a value of 2 is mapped.
2
Priority 3 The traffic class to which the Regenerated
Priority with a value of 3 is mapped.
3
Priority 4 The traffic class to which the Regenerated
Priority with a value of 4 is mapped.
4
Priority 5 The traffic class to which the Regenerated
Priority with a value of 5 is mapped.
5
Priority 6 The traffic class to which the Regenerated
Priority with a value of 6 is mapped.
6
Priority 7 The traffic class to which the Regenerated
Priority with a value of 7 is mapped.
7
To Next Page
Loading...