ITech IT6500C Series

Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 93
CARWave:LV124:E11:TEST:MODE
This command is used to select test mode of LV124 E11.
Command syntax
CARWave:LV124:E11:TEST:MODE <COLD|WARM >
Arguments
COLD|WARM
Reset Value
COLD
Example
CARWave:LV124:E11:TEST:MODE COLD
Query syntax
CARWave:LV124:E11:TEST:MODE?
Returns
<CRD>
CARWave:LV124:E11:PULSe:MODE
This command is used to select pulse mode of LV124 E11.
Command syntax
CARWave:LV124:E11:PULS:MODE <NORMal|SEVEre >
Arguments
NORMal | SEVEre
Reset Value
NORMal
Example
CARWave:LV124:E1:PULS:MODE NORMal
Query syntax
CARWave:LV124:E1:PULS:MODE?
Returns
<CRD>
CARWave:LV124:E12[:STATe]
This command is simulate LV124 E12.