ITech IT6500C Series

Output Commands
Copyright© Itech Electronics Co., Ltd. 46
Example
CC:PRI HIGH
Query syntax
[SOURce:]CC:PRIority?
Returns
<CRD>
[SOURce:]PRIority:TYPE
This command is used to query type of priority.
Command syntax
[SOURce:]PRIority:TYPE <CV|CC>
Arguments
CV|CC
Reset Value
CV
Example
PRI:TYPE CV
Query syntax
[SOURce:]PRIority:TYPE?
Returns
<CRD>
[SOURce:]FILTer:LEVel
This command is used to set level of filter.
Command syntax
[SOURce:]FILTer:LEVel <LOW|MEDium|FAST>
Arguments
LOW|MEDium|FAST
Query syntax
[SOURce:]FILTer:LEVel?
Returns
<CRD>