ITech IT6500C Series

Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 74
Reset Value
0
Example
CARW:ISO21848:Umaxdyn:TEST:PULS 1
Query syntax
CARWave:ISO21848:Umaxdyn:TEST:PULSe[:STATe]?
Returns
<CRD>
CARWave:ISO21848:MOMENTary:VOLTage:DROP[:STA
Te]
This command is used to select ISO21848 analog voltage of short drop wave of
car.
Command syntax
CARWave:ISO21848:MOMENTary:VOLTage:DROP[:STATe] 0|1
Arguments
0|1|ON|OFF
Reset Value
0
Example
CARWave:ISO21848:MOMENTary:VOLTage:DROP 1
Query syntax
CARWave:ISO21848:MOMENTary:VOLTage:DROP[:STATe]?
Returns
<CRD>
CARWave:ISO21848:RESet[:STATe]
This command is used to analog ISO21848 reset wave of car.
Command syntax
CARWave:ISO21848:RESet[:STATe] <bool>
Arguments
ON|OFF|1|0
Reset Value
0