ITech IT6500C Series Manual

Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 69
Chapter12 Car Wave Command（IT6500C）
The car wave command is a special command of IT6500C, but it’s not suitable
for IT6500D Series.
CARWave:ISO16750:SHORt:DROP[:STATe]
This command is used to analog ISO short drop wave of car.
Command syntax
CARWave:ISO16750:SHORt:DROP <bool>
Arguments
ON|OFF|1|0
Reset Value
0
Example
CARW:ISO16750:SHOR 1
Query syntax
CARWave:ISO16750:SHORt:DROP[:STATe]?
Returns
0|1
CARWave:ISO16750:SHORt:DROP:VOLTage[:LEVel]
This command is used to select ISO analog voltage of short drop wave of car.
Command syntax
CARWave:ISO16750:SHORt:DROP:VOLTage <12V|24V>
Arguments
12V|24V
Reset Value
12V
Example
CARW:ISO16750:SHOR:DROP:VOLT 24V
Query syntax
CARW:ISO16750:SHOR:DROP:VOLT?

ITech IT6500C Series Specifications

General

Brand	ITech
Model	IT6500C Series
Category	Power Supply
Language	English