ITech IT6500C Series

Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 73
Arguments
12V|24V
Reset Value
12V
Example
CARW:STAR:DIN40839:VOLT 12V
Query syntax
CARWave:STARtup:DIN40839:VOLTage?
Returns
<CRD>
CARWave:STARtup:DIN40839:VOLTage:STARt:LEVel
This command is used to set user-defined DIN40839 start voltage level.
Command syntax
CARWave:STARtup:DIN40839:VOLTage:STARt:LEVel <Value>
Arguments
12V|24V
Reset Value
12V
Example
CARW:STAR:DIN40839:VOLT:STAR:LEV
Query syntax
CARWave:STARtup:DIN40839:VOLTage:STARt:LEVe?
Returns
<CRD>
CARWave:ISO21848:Umaxdyn:TEST:PULSe[:STATe]
This command is used to in ISO21848Umaxdyn test pulse.
Command syntax
CARWave:ISO21848:Umaxdyn:TEST:PULSe[:STATe] 0|1
Arguments
0|1|ON|OFF