ITech IT6500C Series

SCPI Command Description
Copyright© Itech Electronics Co., Ltd. 15
Example
STATus:OPERation:ENABle 128
Query syntax
STATus:OPERation:ENABle?
Returns
<NR1>
STATus:OPERation:PTRansition
This command is used to edit the positive transition trigger register of
operation event.
Command syntax
STATus:OPERation:PTRansition <NR1>
Arguments
0～65535
Example
STATus:OPERation:PTRansition 1000
Query syntax
STATus:OPERation:PTRansition?
Returns
<NR1>
STATus:OPERation:NTRansition
This command is used to edit the negative transition trigger register of
operation event.
Command syntax
STATus:OPERation:NTRansition <NR1>
Arguments
0～65535
Example
STATus:OPERation:NTRansition 1000
Query syntax
STATus: OPERation:NTRansition?
Returns
<NR1>