ITech IT6500C Series

Load Related Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 58
Returns
NRf
LOAD:POWer:FALL[:LEVel]
This command is used to set falling time for load power.
Command syntax
LOAD:POWer:FALL[:LEVel]
Arguments
MINimum|MAXimum|NRf
Unit
S
Reset Value
0.001
Example
LOAD:POW:FALL 0.2
Query syntax
LOAD:POWer:FALL[:LEVel]? [MINimum|MAXimum]
Returns
NRf
LOAD:POWer:PROTection:STATe
This command is used to set over power protect state.
Command syntax
LOAD:POWer:PROTection:STATe <bool>
Arguments
ON|OFF|1|0
Reset Value
1
Example
LOAD:POW:PROT:STAT 1
Query syntax
[SOURce:]POWer:PROTection:STATe?