ITech IT6500C Series

Load Related Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 57
Command syntax
LOAD:POWer:MAXimum[:LEVel] < MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
W
Reset Value
MAXimum
Example
LOAD:POW:MAX 3100
Query syntax
LOAD:POWer:MAXimum[:LEVel]? [MINimum|MAXimum]
Returns
NRf
Related Command
LOAD:POW:MIN,LOAD:POW
LOAD: POWer:RISE[:LEVel]
This command is used to set rising time for load power.
Command syntax
LOAD:POWer:RISE[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
S
Reset Value
0.001
Example
LOAD:POWer:RISE[:LEVel] 200ms
Query syntax
LOAD:POWer:RISE[:LEVel]? [MINimum|MAXimum]