Parallel Related Command
Copyright© Itech Electronics Co., Ltd. 104
Chapter15 Parallel Related Command
LINK[:STATe]
This command is used to set link state.
Command syntax
LINK[:STATe] <bool>
Arguments
0|1|OFF|ON
Example
LINK:STAT 1
Query syntax
LINK[:STATe]?
Returns
0|1
LINK:ROLE
This command is used to set link role.
Command syntax
LINK:ROLE <SLAVe|MASTer>
Arguments
SLAVe|MASTer
Example
LINK:ROLE slav
Query syntax
LINK:ROLE？
Returns
<CRD>
LINK:NUMBer
This command is used to set link number.
Command syntax
LINK:NUMBer <MINimum|MAXimum|NR1 >
To Next Page
Loading...
