ITech IT6500C Series

DCR Command
Copyright© Itech Electronics Co., Ltd. 48
Chapter8 DCR Command
DCR[:STATe]
This command is used to set state of DCR function.
Command syntax
DCR[:STATe] <bool>
Arguments
0|1|OFF|ON
Reset Value
OFF
Example
DCR 0
Query syntax
DCR[:STATe]?
Return Arguments
0|1
"DCR:DATA?",
This command is used to query DCR value.
Command syntax
DCR:DATA?
Arguments
None
Reset Value
0
Example
DCR:DATA?
Return Arguments
<NRf>