ITech IT6500C Series

Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 76
Query syntax
CARWave:ISO21848:STARtup:PROFile[:STATe]?
Returns
<CRD>
CARWave:ISO16750:LOAD:DUMP[:STATe]
This command is used to simulate load dump wave of car.
Command syntax
CARWave:ISO16750:LOAD:DUMP <bool>
Arguments
ON|OFF|1|0
Reset Value
0
Example
CARW:ISO16750:LOAD:DUMP 1
Query syntax
CARWave:ISO16750:LOAD:DUMP?
Returns
0|1
CARWave:ISO16750:LOAD:DUMP:TEST[:MODe]
This command is used to select the test mode of load dump wave of car.
Command syntax
CARWave:ISO16750:LOAD:DUMP:TEST <AMODe|BMODe >
Arguments
AMODe|BMODe
Reset Value
AMODe
Example
CARW:ISO16750:LOAD:DUMP:TEST AMOD
Query syntax
CARWave:ISO16750:LOAD:DUMP:TEST?