ITech IT6500C Series

Trigger Command
Copyright© Itech Electronics Co., Ltd. 25
Chapter5 Trigger Command
TRIGger[:IMMediate]
This command is used to create a trigger signal.
Command syntax
TRIGger[:IMMediate]
Arguments
None
TRIGger:SOURce
This command is used to set the trigger source.
Command syntax
TRIGger:SOURce <MANUal|BUS|EXTernal>
Arguments
MANUal|BUS|EXTernal
Query syntax
TRIGger:SOURce?
Returns
<CRD>