ITech IT6500C Series

Load Related Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 53
Example
LOAD:CURR:MAX 3.0
Query syntax
LOAD:CURRent:MAXimum[:LEVel]? [MINimum|MAXimum]
Returns
NRf
Related Command
LOAD:CURR:MIN,LOAD:CURR
LOAD:CURRent:RISE[:LEVel]
This command is used to set rising time for load current.
Command syntax
LOAD:CURRent:RISE[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
S
Reset Value
0.001
Example
LOAD:CURR:RISE 4.0
Query syntax
LOAD:CURRent:RISE[:LEVel]? [MINimum|MAXimum]
Returns
NRf
LOAD:CURRent:FALL[:LEVel]
This command is used to set falling time for load current.
Command syntax
LOAD:CURRent:FALL[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf