ITech IT6500C Series

Car Wave Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 84
Query syntax
CARWave:SAE:5?
Returns
0|1
CARWave:SAE[:TEST]:5:TEST[:MODe]
This command is used to select test mode of SAEJ1113-11 TEST 5.
Command syntax
CARWave:SAE:5:TEST <AMODe|BMODe>
Arguments
AMODe|BMODe
Reset Value
AMODe
Example
CARWave:SAE:5:TEST AMODe
Query syntax
CARWave:SAE:5:TEST?
Returns
<CRD>
CARWave:SAE[:TEST]:5[:VOLTage]:UN[:LEVel]
This command is used to set Un of SAEJ1113-11 TEST 5.
Command syntax
CARWave:SAE:5:UN < value >
Arguments
MINimum|MAXimum|NR3
Reset Value
MINimum
Example
CARWave:SAE:5:UN 70
Query syntax
CARWave:SAE:5:UN?