ITech IT6500C Series Manual

SCPI Command Description
Copyright© Itech Electronics Co., Ltd. 17
Returns
<NR2>
SYSTem:ERRor?
This command is used to read the error information.
Command syntax
SYSTem:ERRor?
Arguments
None
SYSTem:REMote
This command is used to switch to the remote control mode(PC control).
In this mode, the keys on front panel is invalid except [Shift]+Meter],
[On/Off] and [Meter].
Command syntax
SYSTem:REMote
Arguments
None
Query syntax
None
Example
SYST:REM
SYSTem:LOCal
This command is used to switch the instrument to local control
mode(control from panel). In this mode ,all of keys on front panel is valid.
Command syntax
SYSTem:LOCal
Arguments
None
Query syntax
None
Example
SYST:LOC

ITech IT6500C Series Specifications

General

Brand	ITech
Model	IT6500C Series
Category	Power Supply
Language	English