ITech IT6500C Series

Output Commands
Copyright© Itech Electronics Co., Ltd. 37
Arguments
MINimum|MAXimum|NRf
Unit
S
Reset Value
0.02
Example
VOLT:PROT:DEL 0.4
Query syntax
[SOURce:]VOLTage:PROTection:DELay? [MINimum|MAXimum]
Returns
NRf
[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude]
This command is used to set output power.
Command syntax:
[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude]
<MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
W
Reset Value
MAXimum
Example
POW 5.0
Query syntax
[SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude]? [MINimum|MAXimum]
Returns
NRf
[SOURce:]POWer:MINimum[:LEVel]
This command is used to set minimum value of power.