ITech IT6500C Series

To Next Page

To Previous Page

Output Commands

Arguments

VOLTage|RESistance

Reset Value

VOLTage

Example

EXT:PROG:MODE VOLT

Query syntax

[SOURce:]EXTern:PROGram:MODE?

Returns

VOLTage|RESistance

[SOURce:]EXTern:PROGram:RANGe

This command is used to set external program range.

Command syntax

[SOURce:]EXTern:PROGram:RANGe <10V/10K|5V/5K>

Arguments

10V/10K|5V/5K

Reset Value

10V/10K

Example

EXT:PROG:RANG 10V/10K

Query syntax

[SOURce:]EXTern:PROGram:RANGe?

Returns

[SOURce:]EXTern:PROGram:RANGe?

[SOURce:]OUTPut[:STATe]

This command is used to control the output switch state.

Command syntax

[SOURce:]OUTPut[:STATe] <bool>

Arguments

0|1|OFF|ON

Other manuals for ITech IT6500C Series