ITech IT6500C Series

Output Commands
Copyright© Itech Electronics Co., Ltd. 43
Command syntax
[SOURce:]EXTern[:STATe] <bool>
Arguments
ON|OFF|1|0
Reset Value
0
Example
EXT 1
Query syntax
[SOURce:]EXTern[:STATe]?
Returns
0|1
[SOURce:]EXTern:MONitor:RANGe
This command is used to set output range of external monitor.
Command syntax
[SOURce:]EXTern:MONitor:RANGe <10V|5V>
Arguments
10V|5V
Reset Value
10V
Example
EXT:MON:RANG 5V
Query syntax
[SOURce:]EXTern:MONitor:RANGe?
Returns
10V|5V
[SOURce:]EXTern:PROGram:MODE
This command is used to set external program mode.
Command syntax
[SOURce:]EXTern:PROGram:MODE <VOLTage| RESistance>