ITech IT6500C Series

Load Related Command（IT6500C）
Copyright© Itech Electronics Co., Ltd. 56
Unit
W
Reset Value
MAXimum
Example
LOAD:POW MIN
Query syntax
LOAD:POWer[:LEVel][:IMMediate][:AMPLitude]? [MINimum|MAXimum]
Returns
NRf
LOAD:POWer:MINimum[:LEVel]
This command is used to set minimum power of load.
Command syntax
LOAD:POWer:MINimum[:LEVel] [MINimum|MAXimum|NRf]
Arguments
MINimum|MAXimum|NRf
Unit
W
Reset Value
0.0
Example
LOAD:POW:MIN 2.0
Query syntax
LOAD:POWer:MINimum[:LEVel]? [MINimum|MAXimum]
Returns
NRf
Related Command
LOAD:POW:MAX,LOAD:POW
LOAD: POWer:MAXimum[:LEVel]
This command is used to set maximum value of power.