ITech IT6500C Series

To Next Page

To Previous Page

List Operation Commands

LIST:EDIT

This command is used to select list file which has been edited.

Command syntax

LIST:EDIT <MINimum|MAXimum|1~10>

Arguments

MINimum|MAXimum|<1~10>

Example

LIST:EDIT 10

Query syntax

LIST:EDIT?

Returns

NR1

LIST:REPeat

This command is used to edit the running times of list file.

Command syntax

LIST:REPeat <MINimum|MAXimum|1~65535>

Arguments

MINimum|MAXimum|<1 to 65535>

Example

LIST:REP 2000

Query syntax

LIST:REPeat? [MINimum|MAXimum]

Returns

NR1

LIST:SEQuence:COUNt

This command is used to edit the wave count of list file.

Command syntax

LIST:SEQuence:COUNt <1-10>

Arguments

<1~10>

Other manuals for ITech IT6500C Series