Section E - Hydraulics
Pumps
Transmission Pump - Series 2 Machines
E-87 E-87
9803-9340-8
Pressure Cut-off Valve
Dismantling and Assembly
The illustration shows the components of the valve.
It is possible to dismantle the valve for cleaning and re-
sealing without disturbing the adjustment screw.
If it is necessary to fully dismantle the valve, first measure
the protrusion of the adjustment screw so that it can be
reset to the original position.
Wrap tape around the threads of the valve housing when
fitting the ‘O’ ring.
After assembly the valve setting should be checked.
864770-1
Fig 26.
To Next Page
Loading...
