jcb Mini CX - Page 295

Section E - Hydraulics
Drive Motors
Wheel Drive Motors
E-125 E-125
9803-9340-8
32 Make sure the shaft motor ports are perpendicular to
the mounting axis of the motor as shown
K Fig 97. ( T E-125).
866090C
Fig 97.
33 Install and tighten the mounting screws (042) to 131-
159 Nm (97-117 lbf ft)
K Fig 98. ( T E-125).
866090D
Fig 98.
ß
ß
ðìî