jcb Mini CX - Page 298

Section E - Hydraulics
Drive Motors
Wheel Drive Motors
E-128 E-128
9803-9340-8
Wheel Drive Motor - End Cover Seal
Dismantling
1 Position the motor on the bearing support. Remove
screws (066) K Fig 106. ( T E-128).
866130A
Fig 106.
2 Remove the end cover (065) K Fig 107. ( T E-128).
866130B
Fig 107.
3 Remove and discard the ‘O’ ring (045)
K Fig 108. ( T E-128).
866130C
Fig 108.
Assembly
1 Install a new ‘O’ ring (045) K Fig 109. ( T E-128).
866140A
Fig 109.
2 Install the end cover K Fig 110. ( T E-129).
ðêê
ðêë
ðìë
ðìë