GETTING TO KNOW YOUR VEHICLE 127
2. Manually remove the protective caps over the windshield
wiper hex bolts.
Protective Cap Over Wiper Bolt
3. Using the provided 15 mm
socket, remove the two hex
bolts and remove the wiper arms.
4. Move to the inside of the vehicle and lower both sun
viso
rs.
5. Using the provided #T40 Tor
x head driver, remove the
four Torx head fasteners located along the interior of the
windshield.
Interior Torx Head Fastener Locations
NOTE:
Store all of the mounting bolts in their original threaded
holes
and tighten for safekeeping.
CAUTION!
Failure to follow this step will cause damage to the
vehicl
e’s header seal.
2
To Next Page
Loading...
