Jeep Gladiator 2020 - Page 208

206 SAFETY
• SSC performance is influenced by the Terrain Select mode.
This difference may be notable to the driver and may be
perceived as a varying level of aggressiveness.
Driver Override
The driver may override SSC activation with throttle or
brake
application at any time.
Deactivating SSC
SSC will be deactivated but remain available if any of the
f
oll
owing conditions occur:
• The driver overrides SSC set speed with throttle or brake
app
lication.
• The vehicle speed exceeds 20 mp
h (32 km/h) but remains
below 40 mph (64 km/h).
• T
he vehicle is shifted into PARK.
Dis
abling SSC
SSC will deactivate and be disabled if any of the following
cond
itions occur:
• The driver pushes the SSC switch.
• The
driveline is shifted out of the 4L Range.
• The
park brake is applied.
• Th
e driver door opens.
• The
vehicle is driven greater than 20 mp
h (32 km/h) for
greater than 70 seconds.
• The vehicle is driven greater than 40 mp
h (64 km/h). SSC
will exist immediately.
Feedback To The Driver
The instrument cluster has an SSC icon and the SSC switch
h
as
a lamp which offers feedback to the driver about the state
SSC is in.
• The cluster icon and switch lamp will illuminate and
rem
ain on solid when SSC is enabled or activated. This is
the normal operating conditions for SSC.
• The cluster icon and switch lamp will flash for several
sec
onds then extinguish when the driver pushes the SSC
switch but enabled conditions are not met.
• The cluster icon and switch lamp will flash for several
sec
onds then extinguish when SSC disables due to excess
speed.
• The cluster icon and switch lamp will flash then extinguish
when
SSC deactivates due to overheated brakes.