IN CASE OF EMERGENCY 417
1. Remove the spare tire, jack and tools from the stored loca-
tion.
2. Using the lug wrench, loosen the wheel nuts (but do not
remo
ve) by turning them counter clockwise one turn
while the wheel is still on the ground.
3. Assemble the jack and jacking tools. Connect the jack
hand
le driver to the extension, then to the lug wrench.
Assembled Jack And Tools
4. Operate the jack from the front or the rear of the vehicle.
Plac
e the jack under the axle tube, as shown. Do not raise
the vehicle until you are sure the jack is fully engaged.
Front Jack Lifting Point
CAUTION!
Do not attempt to raise the vehicle by jacking on
locati
ons other than those indicated.
6
To Next Page
