Jeep Gladiator 2020 - Page 46

44 GETTING TO KNOW YOUR VEHICLE
5. Push and hold down the black security tab under the
wiring harness, and lift the harness lever into the open
position.
Open Wiring Harness
6. W
ith the wiring harness open, pull downward on the
wirin
g connector to unplug. Unhook the wire harness
strap from the hook on the bodyside door opening. Store
the wiring connector in the lower door basket of the door.
7. With the door in the open position, remove the check bolt
from
the door check attachment on the bodyside (using a
#T40
Torx head driver).
NOTE:
Keep the check arm in the extended position for easier
r
e-in
stallation.
Door Check
8. With the door open, lift the door with the help of another
pers
on, to clear the hinge pins from their hinges and
remove the door.
1 — Wiring Harness Lever
2 — Wiring Connector