Jeep Gladiator 2020 - Page 48

46 GETTING TO KNOW YOUR VEHICLE
To remove the rear doors, proceed as follows:
1. Roll down the glass window to prevent any damage.
2. Re
move the hinge pin nuts from the upper and lower
outs
ide hinges (using a #T50 Torx head driver).
NOTE:
The hinge pin nuts can be stowed in the Fastener Bin under
t
he r
ear seat.
Hinge Pin Nut
3. Slide the front seat(s) fully forward.
CAUT
ION!
• H
inge pins can break if overtightened during door
rein
stall (Max Torque: 5.88 ft·lb / 8 N·m). Refer to
“Off-
Road Driving Tips” in “Starting And Operating”
for further information.
• Do not over-tighten Torx fasteners. Damage to the
vehic
le’s parts will occur.