DVR Integration Option Namespace Definitions
24-10515-13 Rev. – A-9
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
Camera Lens Control
Ch#.ZoomExists Integer CR If configuration database exists, this defines
if this camera has this ability
Ch#.Zoom Integer AWR Writing a positive number zooms wide, A
negative number zooms narrow. A 0 stops
zoom
Ch#.FocusExists Integer CR If configuration database exists, this defines
if this camera has this ability
Ch#.Focus Integer AWR Writing a positive number focus near, a
negative number focus far, a zero stops
focus.
Ch#.IrisExists Integer CR If configuration database exists, this defines
if this camera has this ability
Ch#.IrisAutomatic Integer CWR Write one to this property to set the iris to
automatic
Ch#.Iris Integer AWR Writing a positive number drives Iris open, a
negative drives closed, a zero stops the iris
Ch#.StopAllZFI Integer WZ Write one to this property stops all Zoom, Iris
and Focus commands
Ch#.LensSpeedMax Integer CR The maximum speed of the lens. If 1, then
the camera does not support variable speeds
Ch#.LensSpeed Integer CWR Set the lens speed (0 to LensSpeedMax)
Other Camera Commands
Ch#.Arm Integer WZ Arms the camera
Ch#.Disarm Integer WZ Disarms the camera
Ch#.IsArmed Integer RWU -
Ch#.StatusExists Integer CR If configuration database exists, this defines
if this camera has this ability
Ch#.WiperExists Integer CR If configuration database exists, this defines
if this camera has this ability
Ch#.Wiper Integer WR Turns wipers on or off
Ch#.WasherExists Integer CR If configuration database exists, this defines
if this camera has this ability
Ch#.Washer Integer WR Activate washers
Ch#.LightExists Integer CR If configuration database exists, this defines
if this camera has this ability
Ch#.Light Integer WR Turns lights on or off
Tag Name Type Flags Description
To Next Page
Loading...
