DVR Integration Option Configuration
24-10515-13 Rev. – 2-9
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
General Tab
Partition – If partitioning is available, select the partition that will have access to this
AV Switch information.
Public – If
partitioning is available, select this check box to allow all partitions to see
this AV Switch.
Description –
This is the user-defined name of the AV Switch. The name will be
displayed in the AV Player window.
AV Server –
This is the name of the CCTV Server that resides on the PC that the AV
Switch is physically connected to. This name is automatically entered by the
software.
NOTE
When used for the DVR operation, the CCTV Server is also referred to as
the AV Server.
OPC Name – In the text box to the right, enter the number of the AV Switch. The
number is automatically appended to the prefix letter and added to the OPC Name
field. For further information about namespace names and item numbers, see
“Naming Items for the AV Server Namespace” on page 1-9.
Protocol –
Select the DVR protocol to be used with this make and model of the AV
Switch.
Audio-Visual Tab
There are two versions of the AV tab, depending on the protocol used by the AV
Switch. This tab is not available for the Loronix protocol.
To Next Page
Loading...
