Configuration DVR Integration Option
2-18 24-10515-13 Rev. –
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2010 Johnson Controls, Inc.
Controls Tab
If the majority of your Cameras are of one type (for example, fixed), it is
recommended that you select the Camera functions that apply to the majority of the
equipment. You would then be able to specifically configure those Cameras that
have different capabilities.
General String – This string consists of up to 50 characters that may be displayed at
the Monitor when the Camera is operating from the AV Player window (provided
the protocol allows it). It could be the name of the Camera or a description of the
location of the Camera. This is an optional field.
Tilt –
If available, select the check box to enable Tilt for this Camera.
Pan –
If available, select the check box to enable Pan for this Camera.
Zoom –
If available, select the check box to enable Zoom for this Camera.
Focus
– If available, select the check box to enable Focus for this Camera.
Iris –
If available, select the check box to enable Iris for this Camera.
Iris Automatic – If
available, select the check box to enable the Automatic Iris for
this Camera.
Wiper –
If available, select the check box to enable Wiper for this Camera.
Washer – If available, select the check box to enable Washer for this Camera.
Light – If available, select th
e check box to enable the Light for this Camera.
Status –
If available, select the check box to enable Status for this Camera.
Lens Speed –
This is the speed of the lens. Refer to the manufacturer’s instructions.
Lens Speed Max – T
his is the maximum speed of the lens. Refer to the
manufacturer’s instructions.
To Next Page
Loading...
