Jonker Sailplanes JS3 RES User Manual

JS-MD 3 RES Maintenance Manual
Supplement
MD11-AMM-00-002
Issue: 00
Rev. 00
Rev. Date: 23-May-22
Page 4-18
Change of leading-edge protection
The following procedure can be followed if a new protection tape is necessary.
(M3 Scotch 8562, 25 mm Artikel-Nr. 3856225300)
It is also available at the manufacturer. Do not use other materials.
1. Remove the old leading edge protection tape.
2. Clean the bonding surfaces thoroughly with Acetone.
CAUTION: Never touch the clean surface.
3. Fix the new tape first directly at the leading edge.
4. Cut the ends to the correct length and round them.
5. Use a hairdryer to fix the tape without wrinkles, then press the tape thoroughly to the
surface.

Jonker Sailplanes JS3 RES Specifications

General

Brand	Jonker Sailplanes
Model	JS3 RES
Category	Aircrafts
Language	English