Section 1 Introduction
16
Features
DUAL FREQUENCY
Because two frequencies, 200 kHz and 50 kHz can be used, the areas used to
search for schools of fish is more flexible and information on the type of fish or
seabed can be better determined by comparing echoes of each frequency.
The display in the dual-frequency mixed mode is also available. In this mode,
the difference of the echoes between two frequencies is clear.
Simple Navigation Aids Feature
By connecting an optional GPS or DGPS sensor, such information as the
position or course of your ship can be displayed on the screen.
By registering WAYPOINT and ROUTE PLAN, it is also possible to display
such important information as the distance or bearing to/of a WAYPOINT that
ensures safe and economical navigation.
This information can be displayed in the intuitive illustration style or in the
numerical style depending on your selection.
Auto Control Feature
Four Auto Control features are selectable depending on various circumstances,
So anyone unfamiliar with this equipment can use these Auto Control Settings
easily.
Various Alarms Feature
There are several Alarms such as FISH Alarm, SHALLOW/DEEP Alarms,
TEMP UPPER/LOWER Alarms, and each Alarm calls your attention to the
situation by making the buzzer sound.
Note
An optional GPS/DGPS sensor is required to use Alarms relating to the naviga-
tion information.
Water Temperature and Vessel Speed Measuring Feature
The water temperature/vessel speed sensor is integrated in the transducer so that
the water temperature and vessel speed can be measured without any Additional
connections.
Easy-to-operate
It is very easy to operate various features just by using the joy stick and the jog
dial.
To Next Page
Loading...
Need help?
General
