6
Servicing and Safety
•JRC equipment should be serviced only by authorized JRC service engineers.
They will ensure that service procedures and replacement parts used will not
affect performance. There are no user serviceable parts in any JRC product .
•Some products generate high voltages, and so never handle the cables /connec-
tors when power is being supplied to the equipment.
• Always report any EMC related problem to your nearest JRC dealer. We will
use any such information to improve our quality standards.
Suppression Ferrites
The following illustration shows the range of suppression ferrites fitted to
JRC equipment.
Notes for Suppression Ferrite Installation
Connections to other equipment
If your JRC equipment is going to be connected to other equipment using a
cable not supplied by JRC, a suppression ferrite MUST always be fitted to the
cable close to the JRC unit.
To Next Page
Loading...
Need help?
General
