Chapter 2
OPERATIONS
2.7
SOFT KEY OPERATION
2-69
2
INSTRUCTION MANUA
1 Select Mark on the soft key menu.


The "Mark" soft key display appears.
2 Operate with the soft keys.
Soft key 1: X+Y
The mark type of a target is changed.
For details of size setting, see "2.17.2 SETTING MARK FUNCTIONS".
Soft key 2: White Cyan Blue Green Yellow Pink
Red
The mark color of a target is changed.
Soft key 3: Delete
Press to delete the marks of selected type/color.
Hold down to delete all marks.
The confirmation dialog window is displayed.
(Marks and event marks are not distinguished when deleting.)
Soft key 4: Off Enter Erase
Move
You can use the [ENT] key to create/delete/move the marks.
"Enter": Press the [ENT] key to create a mark at the cursor position.
"Erase": Press the [ENT] key to delete a mark at the cursor position.
"Move": Use the cursor to select the mark to be moved and press the [ENT]
key. Then move the cursor to select the new position and press
the [ENT] key to place the mark.
"Mark" is color-inverted.
To Next Page
Loading...
Need help?
General
