Chapter 2
OPERATIONS
2.7
SOFT KEY OPERATION
2-34
2.7.6 AIS OPERATIONS
The AIS function shows the target's information on the radar display, using other ship's
information sent out from the AIS unit.
Reference:
y The inputs of heading, latitude/longitude and AIS signal are required to display AIS.
y For detail settings of AIS functions, see "2.15 SETTING TT/AIS".
1 Select AIS on the soft key menu.
The soft key menu disappears and "Target Select" of the soft key display is
color-inverted.
"AIS" is activated.
2 Operate with the soft keys.
Soft key 1: Numerical Data Retrieved Vessel
DEST Ship
"Numerical Data": The mode is set to AIS numerical data display selection
mode.
"Retrieved Vessel": The mode is set to AIS retrieved vessel selection mode.
"DEST Ship": The mode is set to AIS destination ship selection mode
Soft key 2:
Setting/Release
AIS data display (numerical display, retrieved vessel and destination ship) can be
set/released.
Soft key 3: AIS List
AIS Number SEL
"AIS List": AIS list is displayed.
"AIS Number SEL": AIS list is not displayed.
Soft key 4:
Target Select
When "AIS" of the soft key menu is selected, "Target Select" of the soft key
display is color-inverted.
Sets the numerical display, retrieved vessel and destination ship.
Select "AIS" and press the control.
To Next Page
Loading...
