Chapter 2
OPERATIONS
2.7
SOFT KEY OPERATION
2-33
2
INSTRUCTION MANUA
Relative motion trails:
The system plots the trails of a target at a position relative to the own
ship.
The operator can easily judge whether the target is approaching the
own ship.
While the own ship is moving, the system also plots the trails when the
own ship is turning.
Reference:
True bearing signal input and speed signal input are required to display radar trails in true
motion trail mode.
Soft key 4: Trails
When "RADAR Trails" of the soft key menu is selected, "Trails" of the soft key
display is color-inverted.
Turn the [MULTI] control to change the radar trail length.
Reference:
When "RADAR Trails" is not selected on the soft key menu, press the soft key 4 to activate
the RADAR Trails function.
Short:
Off/15sec/30sec/1min/2min/3min/4min/5min/6min/10min/15min/All
Middle:
Off/30sec/1min/2min/3min/4min/5min/6min/10min/15min/All
Long:
Off/1min/2min/3min/4min/5min/6min/10min/15min/30min/1hr/All
Super Long:
Off/30min/1hr/2hr/3hr/4hr/5hr/6hr/10hr/12hr/24hr/All
To select the maximum time for displaying radar trails, see Section "2.10
RADAR TRAIL LENGTH SETTING")
To Next Page
Loading...
