Chapter 2
OPERATIONS
2.14
FUNCTION KEY SETTINGS
2-112
2.14 FUNCTION KEY SETTINGS
"Function Setting" is provided for always obtaining the best radar video by storing
complex radar signal processing settings in the optimum status by use, and calling the
setting in accordance with the conditions for using the function.
Functions are factory-set for general use, and the settings can be fine adjusted by
operating the menu.
You can select one of 4 function modes. The factory presetting is shown below.
Function1 Setting: Standard Suitable for general monitoring.
Function2 Setting: Coast Useful for observing short-range videos.
Function3 Setting: Deepsea Suitable for general ocean navigation.
Function4 Setting: Fishnet Useful for small target.
2.14.1 FUNCTION KEY OPERATIONS
"Function Setting" operations
1 Open Function Setting from the Main Menu.
"Function Setting" menu appears.
2 Open Function Setting - Function1 Setting .
"Function1 Setting" menu appears.
To Next Page
Loading...
Need help?
General
