Chapter 2
OPERATIONS
2.7
SOFT KEY OPERATION
2-14
2.7 SOFT KEY OPERATION
This radar can be operated with the soft keys and the MULTI control placed on the front
panel of the display unit. You can access to functions without opening the menu screen.
To change the default settings, press the [MENU] key to open the menu screen.
This section describes the operation with the soft keys and the MULTI control.
Keys for operation
y Soft keys 1, 2, 3 and 4
y [MULTI] control
y [CLEAR] key
Soft Key Operations (Example: Opening "Display Screen")
This section describes how to operate with the soft keys shown below.
y TUNE/PRF
y Display Screen
y TM/RM
y Bearing Mode
y Pulse Length
y Off Center
y Symbol Display
y MOB
y Mark
y Line
y Own Track
y Event Mark
y AIS Filter
y TLL TX
To Next Page
Loading...
Need help?
General
