JRC JMA-3300 Series - Setting Cursors

Chapter 2

OPERATIONS
2.11

MARKER SETTING
2-92
2.11.3 SETTING CURSORS
This function enables the setting of detail information about cursor display.
 "Cursor" operations
1 Open Marker - Cursor .

"Cursor" menu appears.
 Cursor Length
Sets the length of the cross cursor mark on the radar display.
1 Open Cursor - Cursor Length .

Short : Cuts the cross cursor mark in length.
Long : Makes the cross cursor mark twice as long as when "Short" is selected.
 Cursor Pattern
Selects the type of the cross cursor mark on the radar display.
1 Open Cursor - Cursor Pattern .
