JRC JMA-3300 Series - Setting Ais Alarm

Chapter 2

OPERATIONS
2.15

SETTING TT/AIS
2-127
2
INSTRUCTION MANUA
L
 Target Number Allocation
Turns on/off the start number of target for tracking.
1 Open Target Number Allocation - TT AIS Own Ship's Cursor .

Turn the [MULTI] control to set the start number of target.
Operate the same way for the other target numbers.
TT
: The start number of target can be adjusted between 0 and 90.
AIS : The start number of target can be adjusted between 0 and 50.
Own Ship's : The start number of target can be adjusted between 0 and 99.
Cursor : The start number of target can be adjusted between 0 and 99.
Reference:
Set the target number of TT/AIS not to overlap each other.

2.15.5 SETTING AIS ALARM
Sets the display of NMEA ALR sentence received from AIS.
 Setting AIS Alarm
1 Open Target - ALR Alarm From AIS .

Off : ALR alarm is turned off.
On : ALR alarm is turned on.