JRC JMA-3300 Series - Adjusting Buzzer Volume

Chapter 2

OPERATIONS
2.13

CONTROL SETTING
2-110
2.13.3 ADJUSTING BUZZER VOLUME
When an alarm goes off, the operation panel of the equipment produces a sound to notify
users of state changes.
Adjust the sound volume as follows.
 "Buzzer" operations
1 Open Control - Buzzer .

"Buzzer" menu appears.
 Setting volume
Sets Key ACK volume.

Turn the [MULTI] control to adjust Key ACK volume.
Key ACK volume can be adjusted between 0 and 255.
When "0" is set, the volume is turned off.
Operate the same way for the other volume settings.
 "Output Buzzer" operations
1 Open Control - Output Buzzer .

"Output Buzzer" menu appears.