JRC JMA-3300 Series - Setting Display Screen

Chapter 2

OPERATIONS
2.7

SOFT KEY OPERATION
2-56
2.7.11 SETTING DISPLAY SCREEN
Sets the layout of radar screen.
1 Select Display Screen on the soft key menu.


The "Display Screen" soft key display appears.
2 Operate with the soft keys.
Soft key 1:
Screen1
The screen changes to the layout set with the menu "Adjust Menu" - "Display
Screen" - "Location Change" - "Screen1".
Soft key 2:
Screen2
The screen changes to the layout set with the menu "Adjust Menu" - "Display
Screen" - "Location Change" - "Screen2".
Soft key 3: Not available
Soft key 4: Numerical INFO TT Detail AIS Detail
Own AIS INFO
MOB INFO
Each time you press the soft key 4 when "Numerical INFO" is set, the soft key
display toggles in the following order:
1XPHULFDO,1)2ĺ77'HWDLOĺ$,6'HWDLOĺOwn AIS INFO"
ĺ02%,1)2
"Display Screen" is color-inverted.