Chapter 2
OPERATIONS
2.15
SETTING TT/AIS
2-124
z Turning on/off the AIS function
1 Open Function On/Off - AIS .
"AIS" menu appears.
Off
: Turns off the AIS function.
On : Turns on the AIS function.
Setting Collision Decision Criteria
Set and check collision decision criteria before operating.
Input the CPA Limit value.
Turn the [MULTI] control to set the CPA Limit value.
The CPA Limit value can be set between 0.1 and 9.9 NM.
Input the TCPA Limit value.
Turn the [MULTI] control to set the TCPA Limit value.
The TCPA Limit value can be set between 1 and 99 min.
To Next Page
Loading...
Need help?
General
