Chapter 2
OPERATIONS
2.17
PLOTTER UNIT
2-147
2
INSTRUCTION MANUA
z Saving Mark/Line
1 Open Save - Mark/Line .
"Mark/Line" menu appears.
Turn the [MULTI] control to set the file number.
After inputting, "Processing." appears on the radar screen.
After saving is finished, the screen returns to "Save" menu.
When overwriting, the dialog box "Exist Same File. Overwrite?" appears.
When selecting "Yes", "Processing." appears on the radar screen.
After saving is finished, the screen returns to "Erase" menu.
When selecting "No", the screen returns to "Erase" menu.
Note:
z After saving data to a USB memory, move the data to a storage, such as PC,
that can store the data with password to prevent data leakage.
To Next Page
Loading...
Need help?
General
