Chapter 2
OPERATIONS
2.7
SOFT KEY OPERATION
2-36
z Displaying AIS data (Operation with the [ENT] key)
AIS data (numerical display) can be done by the [ENT] key operation without displaying
the soft key menu.
1 Press the cursor keys to select "AIS", then press the [ENT] key.
The selected AIS numerical display is set, and the "AIS" soft key is displayed.
Note:
z If operating with the [ENT] key when the soft key menu is closed, the equipment
performs the followings:
On the AIS symbol: Opens the AIS soft key and the numerical display of AIS.
On the TT symbol: Opens the TT soft key and the numerical display of TT.
Not on the AIS or TT symbol:
Opens the TT soft key, it will be acquired.
z If operating with the [ENT] key when the AIS symbol overlaps the TT symbol,
the numerical display of AIS symbol takes priority.
Reference:
y After setting the AIS numerical display, perform the same operations in "ە Displaying
AIS data (Operation with the soft key menu)".
y AIS data (numerical data) is displayed when the soft key 4 is set to "AIS Detail" in the
section "2.7.11 SETTING DISPLAY SCREEN".
z Releasing AIS data display
1 Press the cursor keys to select "AIS", then press the [ENT] key.
Numerical Data, AIS retrieved vessel and AIS destination ship are canceled.
To Next Page
Loading...
Need help?
General
